Blount Retractor
10″ (25.0 cm)Blount Retractor is a general-purpose retractor that can be used in orthopedic surgeries. It is designed with a very flat design allowing it to effectively retract and evenly distribute the pressure being applied while keeping itself out of the surgical field. Additionally it is made with either a single or a double prong making it a highly versatile instrument that can be satisfy a variety of patient needs and surgeon preferences.
SKU:
ESI-01-1008
Category: Hooks & Retractors
Description
| Name | Blount Retractor |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Specialty | Neuro, Ortho & Spine-Retractors |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Euro Site Industries |
| Sterility | Non-Sterile |
| Usage | Reusable |
Reviews (0)
Be the first to review “Blount Retractor” Cancel reply
Shipping & Delivery
Related products
Beckmann-Adson Laminectomy Retractor
hinged arms, 4x4 prongs, 12-1/8" (31.0 cm)Beckmann-Adson Laminectomy Retractor is a specialized instrument made for use in neurosurgical procedures, specifically those pertaining to the spine. This retractor has a long and slim design and features hinged arms from which 4x4 prongs extend. During laminectomy these prongs can be used to retract soft tissue and muscle layers form directly above the vertebral lamina and the ratcheting mechanism can hold the soft tissue out of way. Additionally this instrument is available in two widths 25.0 mm and 44.0 mm as well as in either sharp or blunt to accommodate a variety of surgical approaches.
Blount Knee Retractor
6.0 mm distal tip, 7" (17.5 cm) Blount Knee Retractor is a specialized instrument that is made for use in arthroplasty surgeries. The long narrow portion of this can be slid above the capsular ligament at the joint. It can also be fit around knee implants and thus is suitable for use in knee revision.
Campbell Nerve Retractor
10.5 mm wide blade, 8-7/8" (22.5 cm) Campbell Nerve Retractor is specially designed for use in neurosurgical and other procedures that require manipulation and retraction of nerves. This retractor features a ribbed handle from which extends a slightly curved neck and a retraction blade. The slightly sloping the neck gives this an ideal contour for use in the spinal surgery or in craniotomies.
Caspar Nerve Root Retractor
9-1/2" (24.0 cm) Caspar Nerve Root Retractor is an instrument specially made for use in neurosurgical procedures. More specifically this is used in nerve root retraction in procedures such as lumbar discectomy. The retractor blade comes in a variety of widths including: 6.0 mm, 8.0 mm and 10.0 mm making it a highly versatile retractor that can apply a varied amount of pressure depending on the circumstance.
Caspar-Type Titanium Spinal Spreading System
suitable for dorsal access to the spinal column, interchangeable blades, curved blades allow larger operative area, reduced shadowing during x-ray, unilateral & bilateral access to lamina, lightweight, corrosion resistant titanium Casper Type Titanium Spinal Spreading System a set of instruments and components that is specifically designed for retraction and spreading in orthopedic neurosurgical procedures. This instrument is suitable for dorsal access to the spinal column. It features interchangeable blades which have a slight curvature that allows for a larger operative area and reduce shadowing during x-ray. It allows for unilateral and bilateral access to lamina and is formed from a lightweight, corrosion resistant titanium. It is available as the frame only, blade support with closure, blade supporting with adjustable screw or as a complete set.
Cervical Retractor
9.0 cm spread, hinged frameCervical Retractor is ideally suited for use in retractor of soft tissue and muscle layers in neurosurgical spinal procedures. This instrument can be used at the cervical spinal level in procedures such as laminectomies or hemilaminectomies. Additionally it is available with either a rigid frame or a hinged frame making it more effective at fitting into a variety of different sized patients and opens to a spread of 9.0 cm giving clear access to the surgical field.
Cervical Retractor Fenestrated Blade
stainless steel, ball snap closure, bluntCervical Retractor Fenestrated Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. Both blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge to prevent trauma and tearing during retraction and the fenestrations increase the surface area over which the pressure is distributed. They are available in variety of sizes and curvatures making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Cervical Retractor Lateral Blade
stainless steel, ball snap closure, w/ teeth Cervical Retractor Lateral Blade is an added component to be used alongside the cervical retractor for medial retraction. All five blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth that are variety in their size and curvature making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.

Reviews
There are no reviews yet.